Holy Cross has a hill right behind the school.
From this hill you can see most of the village.

The school was clean and neatly organized.
We stayed in the library where we found a lot interesting Alaska related books.
There were quite a few pictures and art placed in the school.

As we were leaving, principal Kay flew back from Grayling, so we were able to meet her at the airport.
Thanks to John we had a good stay.

The trail from Holy Cross to Russian Mission was one of the least traveled section on our trip. We saw some old tracks heading down the river but nothing clearly marked the trail.

The reason was soon obvious to us. This stretch of the river was either ice or sand, with very small patchy islands of snow the entire way. Our snow machines were more like “sand machines” today.

Without clear markers, it was important to look around for directions, but it was pretty much the same no matter where we went, icy, sandy and bumpy.

If it was ice, the back end of the sled would want to slide around. In some areas the ice looked dangerously slippery and thin. Fresh ice and old signs of overflow was here and there along the way.

Riding in sand is not that great either. It’s like dragging the breaks as you’re riding and everything gets sandy. But Kenji likes the desert so I’m sure he was having a good time…

We had hopes to reach Russian Mission in a 3 to 4 hours, judging from the distance we were travelling up until today. But it took us more than 4 and a half hours. We realized how well we had it on the Iditarod trail.

When we got into town we headed up the hill to the school, but the roads were so ice that we couldn’t make it up.
This whole area is lacking snow this year, and the roads are like polished so slippery that you can slide down the hill with boots.

Once we parked our snow machines and sleds, we examined todays damage. (Usually something lost or broken) We found that the case for the steel pipes was broken, and also the Keel on the sled was completely bent.

Even after this long trip, Kenji successfully drilled another bore hole and established another permafrost monitoring station.

First Kenji talked to the students. He actually talked twice this morning. Once to the middle school and then to the high school kids. There were far less students in school than the total number of students. We heard that the flu going around in the village and a lot of the school kids were out sick. That explains why we didn’t see kids playing outside over the weekend.

He talked in the gym for the mixed grades first. After a brief break, it was round two with the high school students. After the talk we all went to the monitoring station, and Kenji explained how the thermister and data logger worked and showed the current ground temperature to the students.

Shageluk is involved in other science projects, and we hope ours will be an addtion to their projects. After we thank and say good by to Joy, we rode out of Shageluk.

The trail out of Shageluk was hard packed bumps for a few miles and then a few miles of narrow trail that threads through the woods.

With all the bumps and turns, one of the sleds pin came out. Always carry extra parts and pieces incase of emergency, and if you can, put the tool box where it’s easy to get to.

Once we hit the Yukon River, it was like a highway. The smooth hard packed snow coverd most of the river. On top of the good trail condition, it was sunny and warm.
Today was the first time we stopped for a while and had a little snack break.

By 3:30 we were in Holy Cross. The school was closed for a meeting in Grayling, but Principal Kay made arrangements so that we can stay at the school.

What a surprise!
No wind and above zero temperature.
This is what we and everyone along the Yukon River was waiting for, Spring!!!

Since today is Sunday, we had a slow start. First we met Joy, and talked about the project and where we might be able to drill the hole. During that talk we were told that some cold or flu is going around town and most of her students were out last week.
On a trip like this, it’s important to stay healthy so we took some extra vitamins and a lot of water. The water here has a lot of mineral in it and it smells a bit funny, also a yellowish color to it.

Our breakfast was the usual microwaveable “hotpocket” type things. Soon after eating, Kenji was anxious to start drilling and he carries the generator out to start it. Broken!!! One of our lifeline for the field work doesn’t work. So, Kenji works on it and finds a bunch of snow packed in the inside of the generator. While the generator was being dried in the building, we used electricity from the building to power the drill. The electrical cord ran about 50 feet into the woods.

Although he hit tree roots and stuff, the bore holw was dug out in a couple of hours, and the PVC successfully installed in the hole. Justin was there to take pictures to show the other kids what we were doing.

Everything seemed to work a little easier with milder temperature and less wind.

While we were doing this, more mushers were coming and going. Actually, one left and two came in. The mushers arriving usually seems tired, and the dogs also. But when they comes time to hit the trail again, the dogs are excited to go, and just to be sure, the vets are there to check up on the dogs at each check station.

We also installed the thermister and data logger inside the plastic casing to take some readings, so Kenji can show it to the students tomorrow.

After that it was reorganizing the sleds and taking a look around Shageluk. The sleds needed to be packed very good for tomorrow’s trail condition. It will be bumpy and a lot of tight ups and downs through the trees before we get back on the Yukon River. Shageluk is located on the bank of the Innoko River. As a matter of fact the school is called the Innoko River School. The current village moved here in 1965 from the old site where it would always flood in the Spring time. The airport is still located there.

After a brief break, Kenji went to the river to get some water sample and a core sample. Core sampling Kenji style, which means using simple an light weight equipment. This method is not recomended for the light weight. Satisfied with todays work, we cooked dinner in the kitchen, and packed the gear as much as we can for tomorrow.

Today was a big travelling day, both for us and the Iditarod mushers. We were heading down and they were coming up river from Anvik. Since we had to travel 160 miles, we were anxious to hit the trail before noon. But first we waited for the gas station to open up.



Meanwhile Kaltag was getting busier with people and activities. The early arrivals were stting up their make shift sleeping areas in the school gym and foreign reporters were out on the streets filming and intervieweing people. After we said good by to Mike and Jake at the school, we were on th trail by 11:00.

We came accross the current leader, Jeff King, right at Eagle Island, which is a check point for the race. It was 50 miles out of Kaltag in the middle of no where, but a good place to take a break and out of the wind for the mushers. The second musher, Martin Buser, was right behind Jeff King coming out of Eagle Island.

Although there were some winds, and we passed through a brief white out of blowing snow, it didn’t feel as bad as it was just a couple of days ago. But that was only because it was a strong tail wind. All the mushers facing the wind looked like they were really having a tough time. I guess the dogs had it the roughest, now that I think about it. The wind was slowing them down and the ice crystals were hitting them in the face as they were mushing on.

Most of the musher were waving or asking how far it was to Eagle Island, but for others the wind seemed to be too much to even lift their heads. One after another, every half an hour or so, we saw another musher pass by.

Couple of hours later around 3:00 we arrived in Grayling. This was another check station and maybe a few mushers were resting there. We just got gas and hurried our way down the river. It would be best to reach Shageluk before dark, especially going through wooded areas.

Anvik was only an hour away from Grayling. The trail to Shageluk braches off from the Yukon River to a narrower on-land trail. Although this section was not that long, it was probably the most intense and tireing section of this trip, with very tight corners with bumps and most of all, very narrow. We came accross one snow machine with a load of fire wood, and it was lucky that we were able to pass each other. Another lucky thing was that we didn’t see any mushers along this part of the trail. That could have been a near disaster as well.

As we got closer to Shageluk the trail was going through tusuks, and probably because of the low snow this year, it was very hard packed and bumpy, so hard that it was basically ice.

Around 6:30 we drove into Shageluk. The village was busy with allm the mushers coming in and resting, may be about 10 teams.
We are a little wore out from the trip, and now we rest. Tomorrow we plat to drill here.

Principal Day cooked biscuits and gravy for the teachers, and fed us too. He said he was actually cooked for tomorrow, when the Iditarod mushers come through Kaltag. It’s not relly for the mushers, but for the follwers, news, tourists that are travelling with the race. There were actually a lot more planes landing here today, and a couple of new groups arrived at the school today. The lead musher made it to Anvik around noon, a day away from Kaltag.

Today, our main goal for today was to install a monitoring station in Kaltag. Yesterday we asked people about the soil type and chose a patch of wooded area behind the school for the drill site. Conditions were in our favor accordint to what we learned from the locals.

Today was another windy day. Temperature much warmer, maybe even above 0F, and no wind in the trees.
Kenji started out with the portable drill set up, because of the dense trees. If we’re lucky we would only need the generator the electrical hammer drill, and the stainless steel shafts. If this works, this is the ideal way to drill.

The first meter or so is usually easy, what happens after that is what really makes a difference. The first few inches was organic material, soon it became silt. Silt is relatively safe, but sometimes the silt can get sticky and suck the shaft in and glue it to the ground. Kenji said it was one of those sticky kind today. He was pulling on the auger so it wouldn’t dig its self into the ground and get stuck.

Luckily, there were no gravel all the way down to 5 meters, but Kenji had to pay a lot of attention to cleaning out the hole so the shaft wouldn’t get stuck. The pin on the shaft also had a problem, so adding an extension took a lot more effort than it usually does.

Once the hole was 5 meters deep, we carfully slid the PVC pipe into the bore hole. Once this is done it’s great relief. The borehole is secured!

Now the thermister and data logger must be place in the hole, but first we go in the building to warm up.

When it’s cold, threading the thermister cables through the PVC can be a challenge, but it is a good feeling when you have another monitoring station ready to go.

Today was a busy day meeting people.

Since Galena was a bigger town, we really wanted to try to fix the problem with the hitch on the sled. Luckily the auto shop at the Galena Interior Learning Academy was able to help us with it and the hitch is now securely fastened. We broke four bolts so far and we only had two more spares, so this fix was quite a relief.

We also got gas last night. 30 gallons of gas was about $150… These 4 stroke machines get reasonable gas milage, and we are guessing about 10 miles per gallon. They are also vbery smooth on the long straight away with lots of power. I’m sure the packed down trail really helps too. The trail from Manley to Kaltag was well marked and well travelled, probably something to do with the Iron dog race.

Now, the battery situation with one of the machine is still a concern, but not a major problem, especially since we aren’t expecting anymore -40 temperatures. Maybe the battery is not charging correctly because of the cold…? The one machine that kept on stopping for unknow reasons seemed to be cased by a loose battery cable. After tightening the nut we didn’t encounter that problem today.

So, from Galena to Koyukuk was about a 2 hour ride, with snow and ice core sampling along the way. Koyukuk is one of the smaller villages we are visiting. When we got there the school was locked! As we were almost giving up, the door opened and a guy came out. It was lunch time and the doors were closed during lunch hours. What a relief! Josie was the principal and she is originally from Koyukuk. Kenji talked to the older students about our trip and permafrost for about 30 minutes, and we were on our way to Nulato.

After another 2 hours or so, we arrived in Nulato about 3PM. The Nulato school is hosting the district basketball tournament for the next couple of days, and some of the teachers we met from Tanana and Ruby were also there. Some kids form those villages were also snowmiching there to watch the games. Here we met principle Robert. We shook hands and promised that we will meet again.

One interesting thing about the schools we visited is that they all have displays of old pictures of the village or art work from the local artists, along with trophys.

Since Kaltag was only another 36 mile from Nulato, we decided to hit the trail while we still had plenty of day light. By this time the temperature felt much warmer, well it must be compared to -30, and it was mostly tail wind so it was smooth riding to Kaltag. Kenji picked up one stranded snowmachiner 5 miles out of Kaltag. As we arrived in Kaltag the sun was starting to set, and we quickly found Principle Mike Day. He welcomed us into the school.

It is nice to actually meet the people we were communicating with by E-mail or telephone, and to be able to put the faces together with their voice or messages. Without all of their support our trip is impossible, and we thank all of them for their help. We are also meeting many more people than we originally contacted on this trip, and that’s a bonus.

Tomorrow, we will try to drill a permafrost station here and maybe stay one more night. Since it is the weekend coming up, schools will be closed and we also need to find out about the trail condition a little more before we make the longest stretch of travelling.

Kenji had a busy day at Ruby and Galena. He gave two talks in Ruby and then talked to the students at Galena and drilled a permafrost monitoring station.

The temperature was -15 at Ruby. Considerably warmer than the past few days. We were excited about the cahnge in temperature, but that soon changed. As soon as we got down to the river the tempeerature was much colder and also windy again. Does it ever stop blowing on the Yukon River?
May be due to the temperature or loose wire, one of the snow machine was not running well. Sometimes it would just stop on it’s own. It seemed to run okey if we were going about 30 mph, but anything above that and it tends to have problems. hummm…

The trail was well marked and packed down. On opening but it was heavily marked like a porcupine. Along the way, Kenji took some water sample and core sample from the river just before reaching Galena.

Galena has a huge runway because of the old military base. They just shut down recently. THere are two schools here and one of them is called GILA. The principal Harry and science teacher Shayne were great. They helped us with our talk and the drilling. We started drilling after we talked to the kids, so by the time we were done it was 9:30.

A good successful day.

Another cold morning. Where is Spring?
Today we took some core samples from the Yukon River and talked to the students at Tanana. Although it was a rush thanks to Dorothy, she was able to coordinate Kenji’s talk with the high school students.

The biggest problem for today was getting the snow machines started. Last night’s temperature was well under -30F, and was still cold at 10 AM. These two new snow machines without the pull cord can be a problem at times. We also had to rearrange the sleds because of the hitch problem from yesterday.

By noon we were on the trail. Today we had to cover 120 miles of wind blown trail. Even with the trail markers, it was difficult to navigate through the drifted snow and blowing wind at times. Usually it may take about 4 hours, since we had a lot of stuff, it took us more than 6 hours. But we were still very happy to make it to Ruby, since we were also prepared to spend the night on the trail somewhere if it got dark.

Ruby is located on a hillside and the school was located on top of the hill. The heavy snow machines almost didn’t make it up the hill to the school. The principal, Bruce, was kind enough to open the locked doors for us to spend the night, once inside the school Kenji is putting the ice core samples from Tanana into vials.

After installing the thermister and data logger in the bore hole, Kenji talked to the students at the Gladys Dart School (Manley Hot Springs). We spoke with Gladys last night and received a personal welcome, we promised to provide a unique experience for the students. After the talk we all visited the permafrost station in the chilly wind. They were all good tough Alaskan kids!

Soon after the talk, we frantically packed our sleds for our departure. Although we simulated the actual pack over and over again prior to our trip, it took much longer to actually pack all of our gear (mostly drilling equipment).

By noon we hit the trail. Still strong wind from the north was blowing down and across the river. Luckily the trail was well marked and packed down enough that traveling was relatively smooth. But the wind was just constantly hitting us from one direction or another. Kenji’s sled had minor problems with the hitch. The bolts holding the sled snapped and broke. The quick fix was to tie the sled with a rope.

4:00PM we arrived safely at Tanana. It was a great relief to make it there without other problems. Dorothy and other teachers welcomed our arrival. Tomorrow should be a calmer day, according to the weather forecast. We shall wait and see.

Due to limited access of the Internet we were not able to update yesterday.

We left Fairbanks at 6:30 AM.
Along the way, we saw a lot of moose hanging out by the road. Luckily nothing too close.
The road was good and it took us four hours to get to Manley Hot Springs.
Once we arrived, Heidi came to show us around the school and offerd us to stay at the school. Thanks!

With out much delay we started working on drilling the first hole of this trip.
As usual, it took much longer and a lot more complications than expected.
The cold temperture we are having also made it difficult.
The extremely cold layer of soil was freezing up the mud at the drill bit to make it impossible to dig.
After a couple of hours struggle, we managed to get down to about 14ft.
But that also came with a price of the shaft being frozen in the hole.
After another hour of struggle we finally managed to break loose the shaft.

It was a good reminder. Be careful and don’t be greedy when you’re drilling.

It’s olnly our first day of our field trip, but we are already feeling the kindness of the community.
And many thanks to Matt Irinaga (VECO) for driving us out to Manley.